Reasons for Lubrication Failure of Construction Waste CrusherDate:2020-04-21

Summary:What are the causes of lubrication failure of construction waste shredders? How to deal with it? I believe everyone knows the importance of lubrication maintena

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Get Price Staff Service

What are the causes of lubrication failure of construction waste shredders? How to deal with it? I believe everyone knows the importance of lubrication maintenance for the normal operation of a construction waste shredder. However, sometimes the construction waste grinder is lubricated regularly, but the problems of large and small are always "continuous". Did you know that this is probably a lubrication failure, and what causes failure? How to deal with it? This article analyzes one by one.

The common causes of lubrication failure are as follows:

1. Lubricant deterioration

If dust, water and other impurities enter the lubricating system, or the lubricating oil is exposed to sunlight for a long time, it will cause the lubricating oil to deteriorate and make the lubrication of the construction waste crusher invalid.

2. The pipeline is blocked

Dust generated by the construction waste crusher for a long time may enter the system pipeline through various oil supply points and oil return points, causing blockage of the oil supply pipeline or oil return pipeline, resulting in the failure of the lubrication system and affecting the construction waste crusher Normal lubrication. Replacing the original pipeline with a polymer composite tube can reduce the blockage of the pipeline.

3. Improper selection of lubricating oil

Construction Waste Crusher

Different lubricants are used in different seasons. In winter, lubricants with a slightly lower kinematic viscosity can be used, and in summer, lubricants with a higher kinematic viscosity can be used. On the other hand, because the construction waste crusher is in a state of high-speed rotation for a long time, and it will produce violent vibration during operation, it is necessary to choose a lubricant with high viscosity, good adhesion, or good vibration reduction performance.

4. The lubrication system lacks oil

When the lubrication system cuts off the oil or the oil pressure is too low, the lubricating oil cannot enter the lubrication point, causing the lubricating part to heat up due to lack of oil, which is also one of the reasons for lubrication failure. In response to this problem, a self-made oil cutoff alarm can be installed in the lubrication system. When the system is short of oil, the alarm will alarm to remind the staff to refuel in time to ensure good lubrication of the construction waste crusher.

5. There are impurities in the lubrication system

Impurities in the lubrication system will definitely make the lubrication invalid. Therefore, cleaning the lubrication system is also a very important task. When changing the oil, use clean gasoline or kerosene to carefully clean all parts to ensure that the lubrication system is clean and free of impurities. Ensure the normal operation of construction waste shredders and reduce the occurrence of failures due to lubrication failures.

There are various reasons for the failure of construction waste shredders, not only due to lubrication failure. In actual production, users also need to overhaul in time according to their own conditions, so as not to cause greater losses.

Next : Production Process of Barite High-Pressure Mill

Request a Quotation

Hot Sale